I am using a DVP board and mine works fine! I don't need to hit 'F1' unless
In my config file I don't have any '=' signs but just record the message
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of ua4fer
> Sent: Thursday, October 23, 2003 3:09 AM
> To: firstname.lastname@example.org
> Subject: [Trlog] so2r ssb question
> Dear contesters,
> In operation TWO RADIO MODE ssb after performig ALT-D dupe check on
> the inactive radio and then pressing the space bar my second radio
> becomes active in s&p mode and have a callsign of the station whom
> I'm calling in the call window but DVP doesn't play mycall.dvp file.
> It needs to press F1 or ENTER to play it.
> I don't like this second pressing on the keyboard.
> Is it the way to make the second radio active and start
> calling with only one hit on the space bar? In cw mode it works fine
> with only one hit.
> In a cfg file I have line: EX SSB MEMORY F1 = EXF1.DVP (my callsign)
> I in a sbdvpcfg.dat file I have line: EXF1.DVP
> Should I add something else in configuration?
> TRlog is 6.75
> DVP is SBDVP103
> 73 and GL in CQWW
> IGOR UA4FER mailto:email@example.com
> Trlog mailing list
Trlog mailing list