[Top] [All Lists]

Re: [Trlog] Ex Mem Enable problem

To: Tree <>
Subject: Re: [Trlog] Ex Mem Enable problem
Date: Fri, 31 Oct 2003 16:19:25 +0000
List-post: <>
Hi Tree:

Makes sense.  However, when I set up trmaster.dta and use a

the check and section get a space between them.  Entering
the serial number and precedence without a space seems to
work OK, even for two digit serial numbers, though. :-)

Thanks.  I'll enter number/precedence without a space,
and check/section without a space.

The first few hundred QSO's should get me retrained.


Mark, KD4D
> On Fri, Oct 31, 2003 at 01:18:04AM -0800, Jim Smith wrote:
> > I'm using the Sim to practice for SS (should have started earlier as I 
> > need lots).  I have a trmaster.dta file with lots of Qs from previous SS 
> > tests.  I have Exchange Memory Enabled.  So, someone calls me, I call 
> > him back and his Check and Section get loaded into the Exchange window. 
> > However, there is no space between them.  I copy his Nr and Prec into 
> > the exchange window (with spaces) and hit Enter to log the Q.  In most 
> > cases, TR won't log the Q until I go back and put a space between the 
> > Check and Section.  This slows things down.  I don't remember this being 
> > the case in previous versions (but I could be wrong).  I'm using 6.78 
> > 
> > Am I doing something wrong or is there a bug here?  For this SS I could 
> > replace in the trmaster.asc file each =Axxx with =A xxx without too much 
> > trouble and rebuild trmaster.dta.  Would this solve my problem?
> Please EVERYONE, start doing this:
> 67Ore 124A  - no space between NR and prece, and no space between check 
> and section.  
> Tree
> _______________________________________________
> Trlog mailing list
Trlog mailing list

<Prev in Thread] Current Thread [Next in Thread>