Re: [Trlog] TR w/Icom 765 - Receiver Address (fwd)

[Eric Hilding <dx35@hilding.com>]

Many TNX to all who have replied including directly.  And...

Igor - UA9CDC kindly responded:

> Here is my example:
>
> radio one type = IC765
> radio one receiver address = 44
> radio one control port = serial 1
> radio one baud rate = 1200
>
> As you see you also need to supply radio one baud rate if it is different
> from 4800 which is TR log default. Check to what baud rate your radio is
> set.
>
> 73, Igor UA9CDC

Tnx, Igor.  You are my 1st "UA" QSO via a Reflector.  Please QSL, OM.  :-) 
:-) :-)

73 & HNY...

Rick, K6VVA


_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog