On Mon, 16 Feb 2004 16:07:33 EST WG0M@aol.com writes:
> Hi All:
> Well, it is my turn to ask for help on serial port expansion cards.
> KK1L, is also helping to ensure I have TR set up correctly. But,
> something is not
> I have seen a lot of discussion about Byterunner. I have a SIIG
> card with 2
> serial ports and one lpt port. Works great in W98SE. Nothing in
> TR. Rig 2
> is not being polled.
> Anyway, I am thinking it could be the card. Byterunner has three,
> PCI-210H-9, TC-210-9, and T-9001-9 that appear to have what it
> So, my question is which one is recommended. I am running W89SE on
> a 450 mhz
Since you have an ISA slot available,
you certainly don't need anything more than
the T-9000-9, for $16.
I love the Byterunner 4-port boards, because
they use only one IRQ.
SIIG makes good products, too. I wonder why
yours doesn't work? If it's an ISA board, it
should work automatically, once you set the
jumpers. If it's a PCI board, maybe you forgot
to install the dos drivers and run the utilities?
Dave Hachadorian, K6LL
Trlog mailing list