I have done the FISTS Sprints where we use RST SPC Name Mbr#/Pwr in the
exchange. You can't run summary in post, but the logging works. I also
used the FISTS config for the Pesky Texan Contest last night - RST SPC Name
As in Paul's cfg below, you have to calculate the point values for each qso
If concatenating the rig and s/n sounds like a bother, try the FISTS (and
> -----Original Message-----
> From: firstname.lastname@example.org
> [mailto:email@example.com]On Behalf Of Paul Kirley
> Sent: Thursday, March 11, 2004 9:56 AM
> To: firstname.lastname@example.org
> Subject: [Trlog] Elecraft QSO Party 2004
> Field Tester N6WG asked if anyone had set up this weekend's
> Elecraft QSO Party for TR Log.
> Below is a copy of my configuration file, which can be modified
> to suit. Because I have a K1, it is aimed at CW only but *may*
> also work on phone. Be sure to note the requirement to run
> together the rig and serial number when logging, like "579 Bob
> K212". For some reason, TRLog reverses the name and rig data in
> the log, but that should not cause problems.
> Last year it was necessary to parse the log in Excel to score
> field testers, etc., but this year's scoring is so simple that no
> additional effort should be necessary.
> 73, Paul W8TM
> MY CALL = W8TM
> MY STATE = OH
> contest = general qso
> contest name = ELECRAFT QSO PARTY
> QSO BY BAND = TRUE
> QSO BY MODE = TRUE
> ; Points based on QRP; adjust for other powers
> QSO POINT METHOD = THREE POINTS PER QSO
> ; For received QTH, type rig and serial number or power.
> ; No space between received rig and serial number.
> EXCHANGE RECEIVED = RST NAME QTH
> ; Type received RST Name Rig or Power in that order to avoid
> logging name as rig.
> ; TR Log reverses order of name and rig/pwr in editable log, but
> no problem.
> POSSIBLE CALL WINDOW DUPE BACKGROUND = LIGHT CYAN
> DISPLAY MODE = COLOR
> cq EXCHANGE = ^[ Paul K1 850
> s&p exchange = ^@ [ Paul K1 850
> REPEAT S&P EXCHANGE = ^] Paul K1 850
> QSL MESSAGE = ^TU
> CQ MEMORY F1 = ^CQ eqp \ \
> CQ MEMORY F2 = ^CQ eqp eqp \ \
> CQ MEMORY F3 = ^]
> CQ MEMORY F4 = ^Paul
> CQ MEMORY F5 = ^K1 850
> CQ MEMORY F6 = PWR?
> CQ MEMORY ALTF6 = ^PWR?
> CQ MEMORY F7 = ^\
> CQ MEMORY F8 = ^R
> EX MEMORY F3 = ^]
> ex memory altf3 = ^rst?
> ex memory f4 = ^Paul
> ex memory altf4 = ^Name?
> ex memory f5 = ^K1 850
> EX MEMORY altF5 = ^RIG?
> EX MEMORY F6 = PWR?
> EX MEMORY ALTF6 = ^PWR?
> EX MEMORY F7 = ^\
> EX MEMORY F8 = ^R
> ex menu = F2-Ex F3-RST F4-Name F5-RigNr F6-Pwr? F7-W8TM F8-R F9-?
> cq menu = F2-CQ F3-RST F4-Name F5-RigNr F6-Pwr? F7-W8TM F8-R F9-?
> QSO BEFORE MESSAGE = SRI DUPE \
> CALLSIGN UPDATE ENABLE = TRUE
> KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
> ESCAPE EXITS SEARCH AND POUNCE = FALSE
> PADDLE PORT = 1
> CURTIS KEYER MODE = A
> CW TONE = 0
> PADDLE MONITOR TONE = 0
> CODE SPEED = 26
> SHOW SEARCH AND POUNCE = TRUE
> HOUR OFFSET = 5
> DE ENABLE = FALSE
> CONFIRM EDIT CHANGES = FALSE
> BAND = 15
> VISIBLE DUPESHEET = TRUE
> COLUMN DUPESHEET ENABLE = TRUE
> Trlog mailing list
Trlog mailing list