[Top] [All Lists]

Re: [Trlog] How to correct logged band errors?

To: "Kenneth E. Harker" <>
Subject: Re: [Trlog] How to correct logged band errors?
From: "Ronald Rossi, KK1L" <>
Date: Mon, 29 Mar 2004 11:44:40 -0500
List-post: <>
Or just run TR RESCORE which does all of the extra stuff automatically. Your original log will be saved just as normally done when running POST.

Kenneth E. Harker wrote:
On Sun, Mar 28, 2004 at 08:12:16PM -0800, Eric Hilding wrote:

My rig interface got messed up at times due to RF problems from the 20-15-10 vertical I installed on the roof directly over the shack ;-(

I went into the .dat & .log file and made corrections for the known entries which got logged as 160m QSOs when they were really 10m ones. Unfortunately, when I re-open TR (the .cfg) file, the 160m total still includes the mis-logs.

So I tried to see if I could edit the .rst file with Notepad thinking that might be a final fix, but too many bizarre characters.

In a nutshell... "HELP!"... how to fix things???

Tnx much. Not a major score here but would like to see an accurate log sent in for the club effort.

Here is what I would do:

rename your corrected log file to something like FIXED.LOG
(if it's a CW contest, add CW TONE = 0 to your .CFG file)*
At the command prompt, type TR READ FIXED.LOG

TR READ will read in the QSOs from the FIXED.LOG file, and recompute dupes, band totals, QSO points, and multipliers, resulting in a newly-computed score, and a fresh .LOG file
that you can then use in POST. It actually reworks the contest, and is fun to watch. You can learn more about
TR READ in the manual.

*Otherwise, TR will send the CW of the sent portions of every
QSO to the PC speaker.

-- 73 es God Bless de KK1L...ron ( <>< QTH: Jericho, Vermont

My page:
Trlog mailing list

<Prev in Thread] Current Thread [Next in Thread>