On Tue, Sep 28, 2004 at 01:50:29PM +0100, Steve London wrote:
> As far as I can tell, the radio interface is working but....
> - On the 930/PIEXX it causes the frequency display on the radio to be
> "jumpy". Every few hundred milliseconds, various display digit segments
> flash on and off. Shutting down TRLog immediately stops the flashing. This
> doesn't happen with any other version of TRLog.
This could be because TR is polling the radio much more often. There will be
ways to slow this down.
> - Since some functions have been temporarily disconnected, it's hard to tell
> what is a bug, and what is disconnected. So far, I see that the packet
> interface isn't working right - it's not doing line feeds, and the packet
> spots aren't updating the bandmap. Also, the parallel port band output
> isn't working.
Both of these are things I had to rip into.
> - Can you give us the "key" to the \RADIO display ? I see:
> 7006.2 40 CW Transceive VFOA=7006.2 160 CW Off VFOB=7005.7 Off
> What do the "Off" refer to ? What is the "160 CW" all about ?
Off indicates that the VFO isn't being used. You could see transceive
or TX or RX only here.
Trlog mailing list