[Top] [All Lists]

[Trlog] Re: Orion with test TRLog

To: Tree <>
Subject: [Trlog] Re: Orion with test TRLog
From: John Unger <>
Date: Thu, 30 Sep 2004 01:49:32 -0400
List-post: <>
OK, I think I'm beginning to see some real differences between the way the Omni VI and the Orion behave with the new software.

Omni VI+ on Test Radio Interface page (with VFO @ 21.042.2):
Latest Radio One Status
21.042.2  15 CW Transceive VFOA=   0.0 160 CW  0ff VFOB=   0.0 CW  0fff

The "previous" and "filtered" lines look the same and the freq readout is very stable and changes smoothly with the xcvr. ALT-B and ALT-V don't work but TR follows band changes on the rig fine. Mode changes when rig changes mode.

Orion on Test Radio Interface page (with VFOA @ 28050.0 & VFOB @ 14017.9:
Latest Radio One Status
  0.0 NON NON Transceive VFOA= 1296905.0 160 CW  T/R VFOB= 28050.0 CW 0fffff

But it changes sometime either one or both VFO readings will be 1447117.4; sometimes they will actually read the correct two VFO freqs; sometimes they will read the reverse of the two VFO freqs! The freq reading is not stable and changes among the possibilities listed above. I have attached the .bin files from the Orion.

Hope this helps.

73 - John, W4AU

At 12:16 AM 9/29/04, you wrote:
On Wed, Sep 29, 2004 at 01:32:08AM -0400, John Unger wrote:
> Hi Tree -
> Your test version seems to be working OK with my Omni VI+, but not with the
> Orion. The Orion works FB with the latest normal version of TR.
> I've attached the 2 bin files to this email to see if they can help you
> figure things out.

It looks like I am not keeping up with the fast baud rate for the Orion.

I think I have a work around for that - try this version:

Trlog mailing list
<Prev in Thread] Current Thread [Next in Thread>