|Subject:||[Trlog] Re: Orion with test TRLog|
|From:||John Unger <email@example.com>|
|Date:||Thu, 30 Sep 2004 01:49:32 -0400|
OK, I think I'm beginning to see some real differences between the way the
Omni VI and the Orion behave with the new software.|
Omni VI+ on Test Radio Interface page (with VFO @ 21.042.2): Latest Radio One Status 21.042.2 15 CW Transceive VFOA= 0.0 160 CW 0ff VFOB= 0.0 CW 0fff
The "previous" and "filtered" lines look the same and the freq readout is very stable and changes smoothly with the xcvr. ALT-B and ALT-V don't work but TR follows band changes on the rig fine. Mode changes when rig changes mode.
Orion on Test Radio Interface page (with VFOA @ 28050.0 & VFOB @ 14017.9: Latest Radio One Status 0.0 NON NON Transceive VFOA= 1296905.0 160 CW T/R VFOB= 28050.0 CW 0fffff
But it changes sometime either one or both VFO readings will be 1447117.4; sometimes they will actually read the correct two VFO freqs; sometimes they will read the reverse of the two VFO freqs! The freq reading is not stable and changes among the possibilities listed above. I have attached the .bin files from the Orion.
Hope this helps.
73 - John, W4AU
At 12:16 AM 9/29/04, you wrote:
On Wed, Sep 29, 2004 at 01:32:08AM -0400, John Unger wrote:
_______________________________________________ Trlog mailing list Trlog@contesting.com http://lists.contesting.com/mailman/listinfo/trlog
|<Prev in Thread]||Current Thread||[Next in Thread>|