Hi Lee:
I don't believe USB will work. The built-in serial ports work fine.
If it's a desktop, ByteRunner (www.byterunner.com) sells
PCI boards with DOS drivers...I've used their dual serial card
(which I like because of the standard 9-pin connectors) on
at least four computers without a problem.
73,
Mark, KD4D
> On 31 Jan 2005 at 14:27, Pete Smith wrote:
>
> > Let me just add that I have had TR running from a thumb drive all morning
> > here in DEBUG mode -- over 900 QSOs per hour. In my case, I have DOS on
> > the thumb drive, because my computer -- a dirt-cheap Dell Dimension 2400 --
> > will boot from a USB flash device; the option is found by hitting F12 at
> > the beginning of boot-up.
>
> When y'all are doing this, how does the serial communcations work for
> interfacing rigs? Do you have serial ports (SO2R), or are you doing
> USB? How about the LPT and keying?
>
> 73 de Lee
>
>
> --
> Lee Hiers, AA4GA
> Cornelia, Georgia
>
> "Have Dobro Will Travel"
>
>
> _______________________________________________
> Trlog mailing list
> Trlog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|