For a few years now, I've been keying and paddling TRLog with the LPT port.
Every thing was hunky-dory.
Suddenly, I cannot seem to resolve a di-dah problem caused by the paddle
Using my own SO2R box and a TopTen DXD box, I get the same di-dah problem.
The only way to resolve it seems to be to REM out Paddle Port=1 in the .cfg
I figure something is telling pins 12/13 of the LPT to go low and stay low.
Could it be anything in TRLog that might do that?
I've REM'ed and un-REM'ed a bunch of stuff in the cfg to no avail. The only
way to stop the di-dah is to REM out Paddle Port=1.
Could there be anything in Control Panel or DOS that might cause or tell
pins 12/13 of the LPT to be forced low?
Thanks for any help...
Trlog mailing list