This works well. Also, if you install a boot loader (I suggest
GAG) then you can get an on-screen prompt for which operating
system you want to run (Press 1 or 2) and can set one up as
a default after n seconds! I find this more convenient than
getting into the BIOS. http://gag.sourceforge.net/ LILO
and GRUB will do this as well, but I find GAG much easier to
> Here's another way to run TR on a fast XP machine. Maybe it has been
> mentioned before, but I didn't see it in the archives:
> Install an old DOS HDD in the XP machine as a second HDD. Set the
> jumpers to make it the master drive (HDD-0).
> Make the drive with XP on it the slave (HDD-1) by setting its jumpers.
> When the machine starts to boot, enter Bios Setup, and change the boot
> order to either HDD-0 first, or HDD-1 first, depending on whether you
> want to run DOS or XP.
> When I boot to the DOS drive, I get a warning about Frame Base Address
> EMS being unavailable, and expanded memory not being available, but it
> boots anyway. Max executable program memory size is about 600 KB. TR
> data entry, Rig control and cw keying work fine. I haven't tried the
> paddle yet. The computer is a homemade job with an overclocked
> processor equivalent to Athlon XP 3200. I have some other DOS programs
> that I plan to run on here too, like the ones from the ARRL antenna
> book, and EZNEC. Anybody want to buy my old 486 DX 66 (without HDD)?
> Dave Hachadorian, K6LL
> Yuma, AZ
> Trlog mailing list
Trlog mailing list