Hi David:
Very interesting. Thank!. I don't believe CT supports shared IRQ's.
There, the Byterunner
driver may have the advantage, but it costs A LOT more. :-)
Can anyone verify that the new "IRQ-aware" version of TR-Log will
support shared IRQ's?
An old post from Tree from October leads me to believe that it will...as
long as they are
mapped to IRQ 3 or 4. Configuring for CT requires assigning IRQ's other
than 3 or 4 for
the serial ports.
"BTW - for the Orion and new way I collect data from the serial ports, I
am going to have to break down and teach TR how to deal with ISRs.
However, I intend to intercept both interrupts (3 and 4), so it
shouldn't matter how they are setup - I will find the offending UART."
If so, then I may buy a few of these... :-)
73,
Mark, KD4D
David Hachadorian wrote:
>Following up on my msg of yesterday, everything is working now,
>including paddle and a/b relay on the parallel port.
>
>If anyone is looking for a DOS/Windows PCI board that has four serial
>ports, using just one shared IRQ, here is a good candidate that is
>cheaper than the usual Byterunner and SIIG devices:
>
>http://www.newegg.com/app/ViewProductDesc.asp?description=15-124-019&depa=0
>
>It works fb here.
>
>Dave Hachadorian, K6LL
>Yuma, AZ
>
>_______________________________________________
>Trlog mailing list
>Trlog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
>
>
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|