George
Thank you. I dropped back to 6.78 and everything is working fine. I was
getting worried :)
With appreciation
Syl
Sylvan Katz - VE5ZX
Saskatoon, SK
----- Original Message -----
From: "George Fremin III" <geoiii@kkn.net>
To: "VE5ZX" <ve5zx@hotmail.com>
Cc: "TR Log Reflector" <trlog@contesting.com>
Sent: Friday, July 21, 2006 11:33 AM
Subject: Re: [Trlog] Band output in SO2R
> On Fri, Jul 21, 2006 at 11:18:15AM -0600, VE5ZX wrote:
>>
>> I have a DX doubler. It is connected to TR log via LPT1. I am using the
>> BCD
>> output from the DX doubler to drive a band decoder. I was hoping to use
>> LPT2
>> to drive the second band decoder. When I ALT-R to switch from radio1 to
>> radio 2 the BCD output on the DX doubler changes from the band on radio 1
>> to
>> the band on radio 2.
>>
>
> What version of TR-Log are you using?
>
> I am going to make a guess that it might be 6.79 - if so you should
> try 6.78 or earlier. I think that 6.79 does what you describe - it is a
> bug.
>
>
>
> --
> George Fremin III - K5TR
> geoiii@kkn.net
> http://www.kkn.net/~k5tr
>
>
>
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|