On Fri, Feb 09, 2007 at 09:22:28AM -0600, Dale Martin wrote:
> I read up on Tree's paper on using F7/F8 in Sprint.
> I created a sprint cfg in Trlog 6.85.
> When CQ'ing on radio1 using F1 and entering a call<enter> as if a station
> answered my cq on radio2, the station's call and my exchange are appended to
> the end of the cq on radio1. It doesn't automatically switch to radio2 to
> answer the caller there: neither the trlog screen display of the active
> radio nor actual radio switching takes place.
This doesn't make sense to me. You would not be CQing on radio 1 using F1
if you had previously called a CQ on radio 2 - using F7/F8. Please describe
the operating scenario that made you do this.
> When CQ'ing using F7/F8 to CQ on radio2 (inactive radio) and entering a call
> while the CQ is happening, the first letter of the call stops the CQ and the
> radio2 switches to become the active radio.
This is because you have TWO RADIO MODE on I believe.
> This is the second sprint setup in trlog I have tried; the first was in 6.79
> and that worked differently, but didn't work as described in Tree's writeup,
There might be something wrong with 6.85 - which I would like to understand.
> The CQ's in F7/F8 of the CQ and EX modes are as Trlog set them up. I
> haven't messed with them.
> Here's my most of my 07nascw1.cfg. Can anyone see where I may have gone
> astray? I only added Possible call colors and the Relay Control Port
> assignment (otherwise, there was no radio keying switching). Turning on/off
> Two Radio Mode and/or Skip Active Band made no difference.
Well, I think turning off TWO RADIO MODE is a good first step. This should
not be turned on for the sprint.
Perhaps a hint is that you really can only be CQing on one band at a time.
You should do that with F7/F8 and S&P on your active band. You either find
someone to call on the active band (pressing SPACE BAR to call him), or
someone answers your F7/F8 cq on the inactive band. You should not be a
position to enter a callsign while a CQ is happening.
The program is used in a totally different way in the sprint - almost upside
down and backwards from how it gets used in the SS.
Trlog mailing list