----- Original Message -----
From: "Scott Neader KA9FOX" <email@example.com>
Sent: Saturday, February 10, 2007 8:50 PM
Subject: [Trlog] Help with DX Doubler
> OK, I know... last minute here... but I'm going to try
> SO2R in CW
> Sprint with my DX Doubler.
> In the initial setup of TR Log, it asks what port I want
> to use for
> CW Keying for Radio 1 and Radio 2. I answered LPT1 for
> Radio 1, and
> that works fine. But what is the answer for Radio 2?
> The DX Doubler manual says that in Auto mode, Radio 2
> audio will
> appear when Radio 1 is xmitting, but that isn't occurring
> In Manual mode, everything is working. So, worst case, I
> manually flip the DX Doubler switches... but there has to
> be a better way. :-)
> P.S. I am using version 6.53 -- maybe there is a better
> version to do
> what I need to do?
> - Scott KA9FOX
I don't have a dx doubler, but if it works like my homemade
box, which it probably does, you need:
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
KEYER RADIO TWO OUTPUT PORT = PARALLEL 1
RELAY CONTROL PORT = 1
If the radios come out backwards, there is a command to
invert the relay sense, but I can't remember the syntax
See you tonight!
Dave Hachadorian, K6LL
Trlog mailing list