Thanks Mark!!! I edited my .CFG to say:
RELAY CONTROL PORT = 1
And that was it !!!!!!!!!!!
Hope to see you all tonight! I'll be operating as K9RAT.
At 03:08 PM 2/10/2007, you wrote:
>You want LPT1 for Radio 2 as well.
>There is also a RELAY CONTROL PORT setting that
>has to be set to "1" to activate the pin that
>Scott Neader KA9FOX wrote:
>>OK, I know... last minute here... but I'm going to try SO2R in CW
>>Sprint with my DX Doubler.
>>In the initial setup of TR Log, it asks what port I want to use for
>>CW Keying for Radio 1 and Radio 2. I answered LPT1 for Radio 1,
>>and that works fine. But what is the answer for Radio 2?
>>The DX Doubler manual says that in Auto mode, Radio 2 audio will
>>appear when Radio 1 is xmitting, but that isn't occurring either.
>>In Manual mode, everything is working. So, worst case, I can
>>manually flip the DX Doubler switches... but there has to be a better way. :-)
>>P.S. I am using version 6.53 -- maybe there is a better version to
>>do what I need to do?
>>- Scott KA9FOX
>>Trlog mailing list
Trlog mailing list