I've had my 2 serial, 1 parallel port for probably about 8 years now and it
has always worked fine in Dos. but the program and the steps you take I
could see might and now that I'm using XP and WriteLog most of the time
now, if I format the drive or put it on another pc running XP, I just go to
the site and download the file for XP, which is an .exe and it does more of
the work. The Dos version is a bit of a challenge, and I can imagine
difficult for those who have never used Dos. I have yet to try the PCI board
that gives you 4 serial ports from another company. I really didn't need it,
but at such a great price, I thought it would be nice to have in case I ever
Glad to hear Dan helped you get it going. I just hope we don't run into
problems with them not putting empty pci slots in. I guess then we move to
USB and Bluetooth and hope for the best.
73, Mike K9MI
----- Original Message -----
To: <firstname.lastname@example.org>; <email@example.com>; <MWA@w0aa.org>
Sent: Tuesday, February 13, 2007 01 45
Subject: [Trlog] VSEMUIO BYTERUNNER/DOS -SOLVED SO2R AGAIN
> In a message dated 2/12/07 5:53:28 P.M. Central Standard Time,
> firstname.lastname@example.org writes:
> See no one responded via the reflector. Did you get the help you need or
> you still need some help.
> If you have the commands all figured out how to start up the program from
> the command prompt, then adding it to the autoexec file is easy.
> Got it working, finally thanks to Dan, KD4D. He spent the weekend
> with me until we had success. He suggested I summarize and publish what
> I had
> to do so others can benefit. I shall.
> My system is W98SE
> I am doing SO2R and decided to run RTTY using MMTTY. However, I needed
> more Com ports. To solve this issue, I purchased aByterunner 410 H 4
> serial/1lpt card.
> Problem: In DOS and running TR, I could not establish rig 2 /computer
> munication like I had with the card I removed. So, I asked for help.
> Dan came to my rescue and spent the better part of this weekend helping
> The below instructions are for the Byterunner 410 H 4 serial/1lpt card.
> card comes with a disc that contains drivers (including DOS), VSEMUIO
> instructions and VSSHOW program that will display port addressing.
> The first step is to create a file named VSEMUIO and saved it on the C
> I saved the VESMUIO.EXE (from the supplied cd and VSEMUIO.CFG file (see
> The second step is to set up a cfg file using Notepad. Here is mine:
> Save it as VSEMUIO.cfg in the VSEMUIO folder described above. The
> instructions are detailed in the VSEMUIO Readme file.
> The below instructions are what I did to configure COMM 5 to work in DOS
> Third, in TR Two radio config file (some may call it logcfg.dat), I
> my rig 2 config line to read
> RADIO TWO CONTROL PORT = SERIAL 5 (EXISTING)
> SERIAL 5 PORT ADDRESS = 02E8 (NEW)
> Reboot into DOS. I hit the F8 key on boot to get me to the command
> During the boot, you should see the string
> C:\>C:\VSEMUIO\VSEMUIO C:\VSEMUIO\VSEMUIO.CFG
> This means the VSEMUIO program is running. At the C prompt start TR the
> you normally do and enjoy.
> I am back to SO2R
> So why did I do this? RTTY.........first card only gave me a total of 6
> Com 1 Packet
> Com 2 Rig 1
> Com 3 Keyboad
> Com 4 mouse
> Com 5 Rig 2
> Com 6 Rotor
> Com 7 Rtty rig 1
> Com 8 Rtty rig 2
> Dan gave me permission to publish his email address; email@example.com_
> I am truly grateful for all the help Dan provided
> Michael WG0M
> Trlog mailing list
Trlog mailing list