On Tue, Mar 20, 2007 at 07:49:10AM -0400, John Unger wrote:
> VHF Q's are legal in the VAQP, so I turned on my 2 meter radio and worked a
> few stations who were operating mobile in this mode. Since TRlog was set up
> in SO2R mode, I logged them as 40CW Q's and since they were still in the
> editable window I changed the band and mode manually to 144FM after working
> them. This action may not be part of the actual problem describe below...
> Here's the problem: The last two of the edited Q's were my numbers 74 and
> 75. After QSO #75 the rest of the log was on 80CW. My next three Q's in the
> log all have the same number, 76, and the following three are all #77. QSO
> numbers 78 and beyond all increment normally by one. I watched this
> behavior as I operated trying to figure out what to do and was relieved
> when it seemed to cure itself.
> Has anyone experience a similar problem? I've never seen this behavior
> before in using TRlog for over 11 years.
The problem is simply that the program ignored the VHF QSOs when they scrolled
off the top of the screen when computing the QSO number.
Trlog mailing list