On Mon, Nov 05, 2007 at 04:03:52PM +0200, Victor Goncharsky US5WE wrote:
> RADIO ONE TYPE = IC735
> RADIO ONE BAUD RATE = 1200
> RADIO ONE CONTROL PORT = SERIAL 1
> FREQUENCY ADDER RADIO ONE = 119998000
>
> This corresponds to the correct 144 MHz frequency in "TR-log frequency
> window" with X-tal oscilator correction.
>
> When trying to send the DXcluster spot using " ` " button, the program
> sends the spot using the original i.e. 24048 instead of 144050 to the
> dxcluster server.
>
> While DX-Spider rejects the spot as being out of range, CLX accepts it.
>
> Band Map shows sent spots and CQ/n correctly.
>
> Hope this problem will be not difficult to cure.
I'll look at it.
> I wish I would use use my FT736R more but, for some reason, although being
> one of the best multimode VHF/UHF rigs ever made, it isn't supported by
> TRlog.
The better statement here is that the FT736R doesn't really have the command
set to be interfaced to a computer efficiently.
Tree
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|