Another useful command to remember for the FT1000MP, if you need it, in the
logcfg.dat file is:
FT1000MP CW REVERSE =
Set it to either TRUE or FALSE to determine if you use normal or reverse
mode for CW. I found it a useful command for my Orion, too.
73 - John, W4AU
At 04:17 PM 2/12/2009, paul@paul-hicks.ca wrote:
>Hi again...
>
>I have the radio connected from CAT connector to serial port 1 on computer.
>
>Using parallel port to interface with radio for cw. Works fine.
>
>Am starting from scratch, so don't have a config file that I know
>works. As stated above, the rig keys cw fine via TRLog.
>
>Have statement in config file that radio = FT1000MP. Do I have to set
>anything else in the config file so that data goes back and forth?
>
>Appreciate the help I get from you all.
>
>73, Paul.
>ve3zt
>
>_______________________________________________
>Trlog mailing list
>Trlog@contesting.com
>http://lists.contesting.com/mailman/listinfo/trlog
>No virus found in this incoming message.
>Checked by AVG - www.avg.com
>Version: 8.0.233 / Virus Database: 270.10.23/1947 - Release Date: 02/04/09
>16:35:00
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|