TRLog
[Top] [All Lists]

Re: [Trlog] [SPAM] Re: [SPAM] Re: Out of memory...

To: trlog@contesting.com
Subject: Re: [Trlog] [SPAM] Re: [SPAM] Re: Out of memory...
From: paul@paul-hicks.ca
Date: Thu, 22 Apr 2010 22:37:20 -0400
List-post: <trlog@contesting.com">mailto:trlog@contesting.com>
I've been learning about Freedos.

Using a memory manager, in upper right corner of TR:
      MEM = 100 424

After entering a 9 contacts, memory drops to 74 832

Also, after entering 3 or four contacts, TR quits, DOS prompt appears 
with text:
     invalid opcode at 009A AA02 7293 6A34 9A15 028A 35CA BCA3 890B 
BE16 C60B 7706 000B

Configsys file:
devicehigh=c:\himem.sys
c:\mem\jemmex.exe (memory manager)
dosdata=high
dos=high
fileshigh=20

Any ideas?

++++++++++++++++++++++++++++++++++




At 04:36 PM 20/04/2010, you wrote:
>On Tue, Apr 20, 2010 at 04:18:27PM -0400, paul@paul-hicks.ca wrote:
>
> > When TR-Log is loaded, I'm  left with 3k of ram.
> >
> > After 1st contact, that drops to 72 kb.
>
>I keep getting confused with these two data points.  If you start off with
>3k of ram, how does one drop to 72k?
>
> > If you are familiar with FreeDOS (I"m not), I'm using version 0.84.
> > Many of the commands don't work for me. I get error message, "Wrong
> > version of DOS."
>
>I am also not familar with FreeDOS.
>
> > I have also seen the errormessage inside of TR, "not enough memory to
> > load big list," or words to that effect.
>
>Sounds like TR is constrained by the amount of free memory.
>
> > Have you any ideas, Tree?
>
>Is there some command that can show what is loaded into memory before
>starting TR?
>
>Tree
>
>
>
>Checked by AVG - www.avg.com
>Version: 9.0.801 / Virus Database: 271.1.1/2822 - Release Date: 
>04/20/10 02:31:00

_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog

<Prev in Thread] Current Thread [Next in Thread>