Just spent this morning looking at IRQs and baud rates > 4800 baud.
After a few hours of reviewing everything, I figured out that my test setup
was not working because COM3 on my computer isn't tied to any IRQs. If I
use COM1 - which is - everything seems to work fine. I just had the K3
running at 9600, 19200 and 38400 baud with USE IRQS = TRUE.
This is with version 6.95 or 6.82. So I think this has been working for
If anyone is having issues with this and is SURE that their hardware is
setup right, then please let me know.
Trlog mailing list