Mark,
I have seen this (or a very similar) problem. In my case (and I probably am
using 2 radios), someone comes back to a CQ I enter the call and hit return,
only his call is sent then nothing else but the PTT is locked on. ESC may
clear it but then it happens again if I hit enter again. Also can't
recreate it.
This probably doesn't help except for the fact that others do have a similar
problem. Just kind of an annoyance-not a deal breaker.
BTW does anyone edit the cty.dat file so it can be used with TR?
Eliminating all those lines that just hog memory?
Mike W9RE
-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com] On
Behalf Of kd4d@comcast.net
Sent: January 31, 2011 4:24 PM
To: trlog@contesting.com
Subject: [Trlog] PTT Stuck On
Good day, again, Tree and everyone
A few times this weekend, using TR695 with two radios, I had the "PTT" pin
on the
parallel port get "stuck" on after CW was finished sending. I had to exit
and
re-start TR to get it to clear. I can't remember what else I tried.
I've seen this before. Anyone else seen the problem? It happens
infrequently and
I don't know how to reproduce it. I think I may have done an ALT-D, started
typing, and then hit escape to abort it at least once when this occurred.
Thanks.
73,
Mark, KD4D
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|