I used 6.96 this weekend.
The interface worked great, although after sending QTCs, I wasn't sure why
the call sign remained in the window. After each batch, I hit <Enter>, Y,
Esc, and my TU message. Is there a simpler way?
I also noticed that it wasn't possible to change the CW speed once the QTC
process was started. That would be nice.
Robert K5PI
-----Original Message-----
From: trlog-bounces@contesting.com [mailto:trlog-bounces@contesting.com] On
Behalf Of Mike Wetzel
Sent: Monday, August 13, 2012 9:24 AM
To: trlog@contesting.com
Subject: [Trlog] WAE
FWIW I just sent in my Cabrillo log plus the other 2 files required and got
a very good quality report. The only ? was my score in the Cabrillo did not
match the score from the log (224K vs. 1.2M) so you might confirm that in
your submission. I used TR7.00. The only problem I experienced is
something that I have seen before. I got the cursor back in the call sign
field late in the QSO process and could not get it out so I had to reboot
the computer both times. I tried punching a lot of keys, some did nothing
and others sent unknown strings!
Mike W9RE
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|