----- Original Message -----
From: Robin Midgett <robin.midgett@vanderbilt.edu>
To: Mark S. Adams, P.E. <msadams@acsu.buffalo.edu>;
<rvhfg_general@yahoogroups.com>; Stanford Reflector <vhf@w6yx.stanford.edu>;
VHF Contesting Reflector <vhfcontesting@contesting.com>
Sent: Thursday, January 30, 2003 1:50 PM
Subject: [VHFcontesting] Re: Q: Power Level Setting on Popular Multimodes
> According to page 49 of the manual, the 100D allows TX power adjustment on
> a per band basis from 50 MHz. & up; only one setting for H.F.
OK mine works that way.
>In addition,
> all these settings are variable based on mode; i.e., one setting for 50
> MHz. FM and another for SSB, etc. As you select mode and band the TX power
> is set accordingly.
>
Sorry mine does not work that way. While I can set a separate power level
for AM, I don't see how to set a separate level for the others (SSB, CW,
FM). IE there is only one setting for these modes (per band).
Tom
|