VHFcontesting
[Top] [All Lists]

Re: [VHFcontesting] Transverter interfacing with FT290RII

To: Sean Waite <waisean@gmail.com>
Subject: Re: [VHFcontesting] Transverter interfacing with FT290RII
From: Mark Spencer <mark@alignedsolutions.com>
Date: Wed, 14 Feb 2018 09:39:35 -0800
List-post: <mailto:vhfcontesting@contesting.com>
On my to do list is to figure out if I can safely wire a foot switch (or maybe 
a hand held pistol grip style PTT switch) in parallel with the PTT lead(s)from 
the microphone(s).   I'm not 100 percent certain that the microphones will 
appreciate having the PTT lead grounded if the PTT button isn't depressed.  
Other wise I'll need to work out an "OR" gate scheme to handle multiple PTT 
inputs.

Also need to sort out if applying PTT via the microphone connection is 
functionally the same as applying PTT via the "send" input on some of my radios 
when using CW.


I like to keep the roving setup as simple and fool proof as possible from an 
operating perspective.  

73
  

Mark S
VE7AFZ

Aligned Solutions Co.
mark@alignedsolutions.com
604 762 4099

> On Feb 14, 2018, at 9:10 AM, Sean Waite <waisean@gmail.com> wrote:
> 
> It seems like that method will work, just toss a switch in line for when you 
> want to use CW to ground PTT for the duration. Wire it so that either the 
> switch (or foot switch ) will ground ptt, or the hand mic will. 
> 
> As for operating while driving, just connect the PTT switch to your gas pedal 
> and drive faster! 
> 
> Sean WA1TE 
> 
>> On Wed, Feb 14, 2018 at 11:08 AM Mark Spencer <mark@alignedsolutions.com> 
>> wrote:
>> Interesting..
>> 
>> Apparently I'm not the only one working thru these issues.  With my Icom 
>> radios I like to intercept the PTT line from the microphone, route the PTT 
>> line thru a sequencer, then key the radio, amp, etc via the sequencer.   It 
>> seems safer that way but yes sending CW with this scheme is a bit more 
>> complicated than using SSB.  I should probably add a foot switch for CW and 
>> need to ponder how to tie that into the the PTT scheme.
>> 
>> I also have a FT290 put aside for future use as an IF radio in my rover so 
>> this topic is of interest to me.
>> 
>> 73
>> Mark S
>> VE7AFZ
>> 
>> mark@alignedsolutions.com
>> 604 762 4099
>> 
>> > On Feb 14, 2018, at 7:02 AM, Sean Waite <waisean@gmail.com> wrote:
>> >
>> > That might be where being able to flip a switch would come in handy. If I'm
>> > reading the documentation right, the DEMI transverters prefer you don't use
>> > full- or semi-break in with CW anyway, so you'd want it to just stay on
>> > until you're done transmitting. That's a good point though, especially with
>> > a portable setup.
>> >
>> > Sean WA1TE
>> >
>> >> On Wed, Feb 14, 2018 at 8:33 AM Zack Widup <w9sz.zack@gmail.com> wrote:
>> >>
>> >> I have been using mine in a similar manner, but I thought someone might
>> >> offer a better way to do it.
>> >>
>> >> I don't use the FT290RII as an IF rig too often. But as I have it wired,
>> >> when working CW I have to hold down the mic button with one hand while
>> >> sending CW with the other hand. It's a bit unwieldy.
>> >>
>> >> 73, Zack W9SZ
>> >>
>> >>
>> >>> On Tue, Feb 13, 2018 at 11:23 PM, Sean Waite <waisean@gmail.com> wrote:
>> >>>
>> >>> Thanks for the responses! I got a few good ideas here. I'm not entirely
>> >>> certain why it never occurred to me to pull the Push To Talk signal off
>> >> of
>> >>> the thing you push...to talk. Way easier than trying to tap the board.
>> >>>
>> >>> I have some reading and building to do. Hopefully I'll be up on 7 bands
>> >>> (Dare I say...hopefully 8? If I can pull together the scratch for 13cm)
>> >> by
>> >>> June.
>> >>>
>> >>> Either way, looking forward to getting this all working smoothly.
>> >>>
>> >>> 73,
>> >>> Sean WA1TE
>> >>>
>> >>>> On Tue, Feb 13, 2018 at 11:52 AM Michael Kana <aa9il@sbcglobal.net>
>> >>> wrote:
>> >>>
>> >>>> Hi Sean
>> >>>> I use an FT290mk2 with a sequencer. I use the 4th relay to close the
>> >> PTT
>> >>>> and key line and plug the key and mic into a “control box” where the
>> >>>> sequencer relay is in line. I have the key and mic cables run to the
>> >>> radio.
>> >>>> I flip a switch to sequence and when the fourth relay closes, the key
>> >> and
>> >>>> PTT lines are closed so I can then key or transmit.
>> >>>> When done, flip the switch off, and the key and PTT lines are
>> >>>> disconnected. I will never Key the radio until the sequencer is
>> >> switched
>> >>>> unless I intentionally bypass this scheme and plug into the radio
>> >> direct.
>> >>>> 73 Mike
>> >>>>
>> >>>> Warning!  This is transmitted over a non secure medium
>> >>>>
>> >>>>> On Feb 13, 2018, at 10:38 AM, Sean Waite <waisean@gmail.com> wrote:
>> >>>>>
>> >>>>> I've got one of the old FT290RII 2m all modes that I'm using as t
_______________________________________________
VHFcontesting mailing list
VHFcontesting@contesting.com
http://lists.contesting.com/mailman/listinfo/vhfcontesting
<Prev in Thread] Current Thread [Next in Thread>