WriteLog
[Top] [All Lists]

[WriteLog] RTTY using COM port derived from USB port

To: <writelog@contesting.com>
Subject: [WriteLog] RTTY using COM port derived from USB port
From: SteveBaron@starlinx.com (Steve Baron - KB3MM)
Date: Wed, 12 Apr 2000 23:22:19 -0000
Interesting.

What happens when you configure the port for 5 databits in device manager ?
Is 5 even available in the drop down list ?    Any error messages ?

----- Original Message -----
From: michael watts <wy6k@yahoo.com>
To: Reflector Writelog <writelog@contesting.com>
Sent: April 12, 2000 10:21 PM
Subject: [WriteLog] RTTY using COM port derived from USB port


>
> Thanks to everyone who replied.  For those who care
> what was learned about this:
>
> It appears that this won't work with any USB to serial
> converters that people reported using.  The reason is
> apparently that they do not support the 5 bit format
> used by rtty.
>
> The only solutions seem to be AFSK or the use of a
> TNC.  I will use AFSK until I get an appropriate piece
> of hardware, then I will use FSK and I will be able to
> use the nice twin peak filters in the IC756PRO.
>
> Thanks again!
> Mike wy6k
>
> __________________________________________________
> Do You Yahoo!?
> Send online invitations with Yahoo! Invites.
> http://invites.yahoo.com
>
> --
> WWW:                      http://www.contesting.com/writelog
> Submissions:              writelog@contesting.com
> Administrative requests:  writelog-REQUEST@contesting.com
> Problems:                 owner-writelog@contesting.com
>
>


--
WWW:                      http://www.contesting.com/writelog
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>