WriteLog
[Top] [All Lists]

[WriteLog] %C vs %D "explains" my problems!

To: <writelog@contesting.com>
Subject: [WriteLog] %C vs %D "explains" my problems!
From: jfleming@shelbynet.net (WA9ALS - John)
Date: Thu, 20 Jul 2000 21:46:12 -0500
Many thanks to Bruce (WT4I) for fingering the problem area!  Since I
figured out this afternoon that I only see THE PROBLEM when there is a
callsign in the entry area, I've been planning to read about %C and %D
again.  Before I got to this, Bruce reminded me that %C requires some
more "processing" than %D.  Sure enough, I can observe the problem using
%C in my buffers, then change to %D and the problem is GONE!  YAY!  Back
to %C and it's there again!

I've always used %C and never had a problem like this until v10.17f and
now v 10.18a.  Something must be different in how these handle %C, and
it might deserve some attention from Wayne, especially for the CW
users...?

Thanks again, Bruce!  73
------------------------------------------------------------
I haven't lost my mind - it's backed up on disk somewhere!
WA9ALS - John
     rig:  MARK-V FT-1000MP http://www.yaesu.com/markv.html
   email:  jfleming@shelbynet.net
homepage:  http://www.qsl.net/wa9als (now with Shack Cam!)
 logbook:  http://www.qsl.net/wa9als/search.htm




--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>
  • [WriteLog] %C vs %D "explains" my problems!, WA9ALS - John <=