WriteLog
[Top] [All Lists]

[WriteLog] Rig Control & PTT

To: <writelog@contesting.com>
Subject: [WriteLog] Rig Control & PTT
From: jflanders2@home.com (Jerry Flanders)
Date: Sat, 16 Dec 2000 16:46:59 -0500
Buy one of the serial port manual switch boxes (and another cable to
connect from it to the rig). They are double-cheap at hamfests, but you pay
$20-30 at OFfice Depot type places.

They are big cnough to let you easily work inside to find the DTR/RTS lines
and solder a tap to it, and run the tap line out a crack/hole in the box.
In mine, I would have plenty of room to build the opto interface into it.

A bonus is that you can use the switch to provide serial port access to
another device when you are not hamming.

Jerry W4UK

At 12:03 PM 12/16/00 -0600, you wrote:
>
>Anyone know of a good way to split out the DTR (or RTS) signals on the rig 
>control serial port? My FT-920 doesn't support PTT on the rig port, but if 
>I could get to DTR or RTS on that same serial cable, I could route those 
>through an optoisolator to drive the external PTT on the rig. I suppose 
>there must be some sort of "breakout box" you can put in line with the 
>cable but not sure what it is or who carries it.
>
>Any ideas short of building my own custom cable?
>
>-Marty NW0L


--
WWW:                      http://www.writelog.com/
Submissions:              writelog@contesting.com
Administrative requests:  writelog-REQUEST@contesting.com
Problems:                 owner-writelog@contesting.com


<Prev in Thread] Current Thread [Next in Thread>