Hi,Doug!
> What seems to not be working is the ability of Writelog to command PTT on
> the rig interface. Under CW PTT Setup, I select "Command rig on COM port"
> and on Port Setup I have both CW and Rig selected on Com1 for the
FT1000mp.
> The rig does go to transmit on the first character but then drops the PTT
> on the first dot or dash.
I m using FT-1000D and haven`t you problem with PTT via rig control on CW
mode.
ALL OK.
73! Igor / RZ3BW
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|