WriteLog
[Top] [All Lists]

[WriteLog] QRZ Writelog users!

To: <writelog@contesting.com>
Subject: [WriteLog] QRZ Writelog users!
From: jon@praxisworks.org (Jon Harder)
Date: Fri, 14 Dec 2001 17:15:09 -0000
You get WL to recognize Com ports (up ot Com 15 ! )   with the special
CommSlot entries you make by editing WriteLog.INI.  See Help file section
called "WriteLog.INI [Ports]." for more specifics.

Among other things you'll find there is the following --

---------------------------------------
"There are 4 "slots" available for WriteLog rig interfacing. By default,
CommSlot1 is COM1:, but you can change that by changing the number on the
right of the equal sign. These settings are not used for RTTY or for packet

CommSlot1=1
CommSlot2=2

In this example, the third and fourth slots are on COM7 and COM8. COM15 is
as high as is supported.
CommSlot3=7
CommSlot4=8 "

-------------------------------
Finally, here's an example from my own [Ports] section  (I have Comm 5 and 6
via a PCI card from
SIIG)  :

;Serial ports 4,5,+6 shown on Setup/Ports window - add more if needed
CommSlot2=4
CommSlot3=5
CommSlot4=6 "

Hope you get it going easily now,

73
Jon,  K1US     Cape Porpoise, Maine
_____________________________



----- Original Message -----
From: "n2bj" <n2bj@attbi.com>
To: "Les Peters" <les.peters@arrisi.com>; "yccc" <yccc@yccc.org>; "Writelog"
<Writelog@contesting.com>
Sent: Friday, December 14, 2001 16:33 PM
Subject: RE: [WriteLog] QRZ Writelog users!


| I don't think you can use above COM2 . If somebody knows how please let me
| know too. I have 8 com ports and would love to be able to use Com 5 or Com
6
| to control some of the other radios?
|
|
| Barry
|
| Barry J. Cohen
| N2BJ
|
| ****PLEASE NOTE NEW EMAIL ADDRESS !!!!
| email: n2bj@attbi.com
|
| Access web site via qrz.com type,
| N2BJ and click on link for homepage
|
| -----Original Message-----
| From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On
| Behalf Of Les Peters
| Sent: Friday, December 14, 2001 8:53 AM
| To: yccc; Writelog
| Subject: [WriteLog] QRZ Writelog users!
|
| I would like to get in touch with anyone who is using Writelog to
| control both a Rigblaster and their radio using COM5 or higher.  I have
| been retrofitting a computer for the ham shack and decided to swap it in
| last night.  As is the case in contesting it looks like I am hurrying
| around trying to make it work in time for this weekends 10m contest.
|
| Les Peters, N1SV
|
| _______________________________________________
| WriteLog mailing list
| WriteLog@contesting.com
| http://lists.contesting.com/mailman/listinfo/writelog
|
| _______________________________________________
| WriteLog mailing list
| WriteLog@contesting.com
| http://lists.contesting.com/mailman/listinfo/writelog
|



<Prev in Thread] Current Thread [Next in Thread>