Look for the CommSlot3 line and make it CommSlot3=5. You should now have
access to Com5 when you restart Writelog.
73s - John - K3ZV
----- Original Message -----
From: "GilBaronW0MN" <gbaron@charter.net>
To: "Doug Faunt N6TQS +1-510-655-8604" <faunt@panix.com>;
<Writelog@contesting.com>
Sent: Monday, January 28, 2002 11:30 PM
Subject: RE: [WriteLog] Port Com 5
> There is a line in the ini file that tells what port is what. You can
change
> that to say 5 is 3 on 6 is 4 or whatever you have to do. It does work, I
> don't remember the exact but you can do it, someone will post it here soon
I
> am sure.
>
>
> > -----Original Message-----
> > From: writelog-admin@contesting.com
> > [mailto:writelog-admin@contesting.com]On Behalf Of Doug Faunt N6TQS
> > +1-510-655-8604
> > Sent: Monday, January 28, 2002 17:06
> > To: Writelog@contesting.com
> > Subject: [WriteLog] Port Com 5
> >
> >
> > I seem to recall something about using ports higher than 4 in WL, but
> > can't locate the dteails, and can't recall the outcome.
> >
> > I have installed a PCMCIA card in my laptop, and it came up as COM 5,
> > and I'd like to use it for the radio control port.
> >
> > Any hints, or should I just forget about it?
> >
> > 73, doug
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
|