Warning - never restrict your query to "WL experts" - even us dummies can
I have used WL to simultaneously decode RTTY audio from two radios by
setting up the DVK, selecting 2 radios, bringing up a second rttyrite
window, selecting stereo AFSK left for one window and right for the other.
I haven't actually switched this over to do CW decoding instead of RTTY,
but assume it would work just as well.
Most difficult part was getting audio from one radio to the tip of the plug
and to the ring from the other. You might need to cut and re-solder a "Y"
At 03:12 PM 2/12/2002 +0000, you wrote:
>I'm trying to figure out how to run audio into my PC in order
>to have audio from two rigs feed two CW decoder windows
>I only have a single "line in" input on the PC for audio.
>I have nothing extra like an SO2R box or W5XD keyer.
>I'm sure this is easy, but wanted to solicit some advice
>from people who have set it up already. I would assume
>one can use some kind of Y adapter for a R/L radio split, but just
>want to make sure.
>Thanks for your help.
>MSN Photos is the easiest way to share and print your photos:
>WriteLog mailing list