WriteLog
[Top] [All Lists]

[WriteLog] PK232 resets

To: <writelog@contesting.com>
Subject: [WriteLog] PK232 resets
From: jbrannig@optonline.net (Jim Brannigan)
Date: Fri, 03 Jan 2003 17:45:47 -0500
I pulled the batteries out of my PK-232 long ago.  That will solve your
problem.

Jim


> I've moved the ham station to a new computer, running 2000-Pro.  After
> setting up WL and RTTYrite, things worked fine for RTTY via a PK232.
>
> I then went back to DX4Win, and RTTY no longer worked there.
Investigating,
> I finally found that WL/RTTYrite evidently had altered several parameters
in
> the PK232.  After doing a "master reset" on the TNC, it once again worked
in
> DX4Win - and WF1B as an additional test.
>
> I then started up WL/RTTYrite, which appeared to work fine.  I closed them
> and went back to DX4Win.  Hosed!   WF1B no longer talked to the TNC
either.
>
> Another master reset, and DX4Win and WF1B were back to fully functional.
> What is going on??!!  To my knowledge, everything set up in WL is either
> default or simple port selection, etc.  I cannot find a clue on what might
be
> doing this.
>
> Any ideas would be greatly appreciated!
>
> 73,
> Steve


<Prev in Thread] Current Thread [Next in Thread>