| To: | <writelog@contesting.com> |
|---|---|
| Subject: | [WriteLog] mk1100 (w5xd+ keyer) - cw to icom 765 |
| From: | mchale@FirstStrike-Inc.com (Jim McHale) |
| Date: | Sun Jan 26 19:13:42 2003 |
The problem: the mk1100 cw output ports wont key my icom 765; Either cw left or cw right keys my 756pro just fine. I can short the key input on the cable to the cw and the 765 keys just fine.. I've swapped the key cables between the pro and 765 and both cables do work. I clicked on 'tune' in wlog and measured 130K ohms on cw left, and 154K ohms on the cw right outputs... This seems to be too high for the 765; Suggestions? Thanx -jim NM1W |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [WriteLog] Serial Numbers and IOTA (as example), MM0ANT |
|---|---|
| Next by Date: | [WriteLog] Writelog Lite, Barry Kirkwood |
| Previous by Thread: | [WriteLog] Serial Numbers and IOTA (as example), MM0ANT |
| Next by Thread: | [WriteLog] Load bandmap from spotting rig, William Hendrick |
| Indexes: | [Date] [Thread] [Top] [All Lists] |