WriteLog
[Top] [All Lists]

[WriteLog] Packet Spots - ARRL DX Multi-Op

To: <writelog@contesting.com>
Subject: [WriteLog] Packet Spots - ARRL DX Multi-Op
From: Zev.Darack@banklink.com (Darack, Zev)
Date: Wed Feb 12 23:56:00 2003
Open the Writelog packet Terminal
In the Edit menu uncheck singleop

73,
Zev N2WKS
Go FRC!!!

-----Original Message-----
From: Georgek5kg@aol.com [mailto:Georgek5kg@aol.com] 
Sent: Wednesday, February 12, 2003 11:16 PM
To: ricp@alum.wpi.edu
Cc: k5dj@writelog.com; writelog@contesting.com
Subject: [WriteLog] Packet Spots - ARRL DX Multi-Op


Ric,

We spoke to Ron, K5DJ, about the following situation, but he was on the road

and could not check with WL, so he referred the question to you.

Here is the situation:

We are trying to set up WL for ARRL DX CW, Multi-multi.  Two radios (A & B) 
have been successfully networked together, and we are able to correctly log 
contacts.  We are using Telnet spots, and we can see the Telnet spots across

the network on each radio's Packet Terminal window.  Radio A is used to 
access the Telnet site, and Radio B's Packet Window is set to "Local 
Network".  

On Radio A, we see the packet spots on Radio A's Packet Spots window.  On 
Radio B we see NO SPOTS on Radio B's Packet Spots window, and therein lies 
the problem.

In the writelog.ini file there is a "SingleOp=n" command in the [PACKET] 
section.  In Radio A, this reads "SingleOp=0", and in Radio B, it reads 
"SingleOp=1".  We believe that "SingleOp=1" may be the cause of the missing 
spots in the Packet Spots window.   If we manually change it to "SingleOp=0"

in writelog.ini, it gets reset to "SingleOp=1" when WL boots up.  

Can you pse let us know what we need to do to get the missing spots?  Any 
suggestions will be appreciated.

Tnx & 73, Geo

George I. Wagner, K5KG
Productivity Resources LLC
941-312-9450
941-312-9460 fax
201-415-6044 cell



_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog



CONFIDENTIALITY NOTICE:  This communication and any attachments are
confidential, and are only for the use of the intended recipient.  If
you have received this transmission in error, any disclosure, copying,
distribution or the taking of any action in reliance upon this
communication is strictly prohibited.  If you have received this
communication in error, please contact the sender immediately and
delete the original message.  Thank you.

<Prev in Thread] Current Thread [Next in Thread>