WriteLog
[Top] [All Lists]

[WriteLog] CW transmit with WriteLog question

To: <writelog@contesting.com>
Subject: [WriteLog] CW transmit with WriteLog question
From: va3mw@portcredit.net (VA3MW - Port Credit)
Date: Mon May 26 08:24:14 2003
You can use the LPT port, but you also need to install one of the drivers
mentioned on the web page for XP to work.  Check the Writelog web pages, but
if I remember correctly, you need to use userport.  Search in the archieve
as many have commented on this.

I also had to delete every mention of LPTx from the Writelog INI file
(c:\windows\writelog.ini).  I also had to add CW_ON_PIN1=1 to ensure the CW
was smooth.

This is what a portion of my .ini file looks like:

[Ports]
COM1:=9600,n,8,1
COM2:=9600,n,8,1
COM3:=9600,n,8,1
COM4:=9600,n,8,1,p
dvktype=2
dvkport=0
cwtype=2
cwport=6
dvkstoploop=1
dvkechomic=1
Comm3Used=USED,POLL,34
Comm3RigManager={D0DE9422-0517-11D4-9D1B-00105AA43DDF}
Comm3Baud=19200
Comm3XmitControl=ALWAYS
CWPTTCONTROL=1
CWPTTDELAY=0
CW_ON_PIN1=1

----- Original Message -----
From: "George Johnson" <w1zt@attbi.com>
To: <writelog@contesting.com>; "James Headrick"
<headrick@radar.nrl.navy.mil>
Sent: Sunday, May 25, 2003 7:08 PM
Subject: Re: [WriteLog] CW transmit with WriteLog question


> James,
> Take a look at the "Universal Setup" section of the K9JY web site:
> http://www.k9jy.com/
> You will also need a serial port cable (like TR, CT, NA) to connect from
> your Com port to the rig keying input.  All of the info is in Scott's
> excellent descriptions.  It works well.
> 73, George .. W1ZT
>
> ----- Original Message -----
> From: "James Headrick" <headrick@radar.nrl.navy.mil>
> To: <writelog@contesting.com>
> Sent: Sunday, May 25, 2003 7:41 PM
> Subject: [WriteLog] CW transmit with WriteLog question
>
>
> >    Recently installed WriteLog on my PC, and I've been unable to have
the
> > PC send messages like: w3cp, 5nn#, CQ test de w3cp,etc. What I mean is
> have
> > the PC open and close a circuit like my bug does or like TR, CT, and NA
> did
> > before I transitioned to a XP operating system PC.  I tried to fill the
> > Port Setup right but don't know what to choose for keyer type, since I
> > don't use a keyer.  My radio is a FT 1000 MP Mark V, and its operating
> > frequency comes up in the log - so I am doing something right.  I would
> > appreciate a little education.  73  jim w3cp
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>


<Prev in Thread] Current Thread [Next in Thread>