WriteLog
[Top] [All Lists]

[WriteLog] Re: CW Keying Interface

To: <writelog@contesting.com>
Subject: [WriteLog] Re: CW Keying Interface
From: wa9als@starband.net (WA9ALS - John)
Date: Thu May 29 14:54:01 2003
Some rigs are difficult to key this way.  For example, I and others have had
trouble getting various optos to pull low enough to key the PTT line of the
FT-1000MP.  I've tried 4n25 and a couple of other commonly-used optos,
including a Darlington pair - all to no avail, and I've seen similar posts
from others.  It's a cleaner way, but might not work with all rigs.

----- Original Message ----- 
From: "Costas Krallis SV1XV" <sv1xv@eexi.gr>
To: <writelog@contesting.com>
Sent: Thursday, May 29, 2003 11:43 AM
Subject: [WriteLog] Re: CW Keying Interface


>
>
> > That's what I use.  Some recommend a 3-4K resistor instead of the 1K
> > - won't hurt, might help.  2N2222 is fine.   I key CW with DTR on the
> > COM port, thru resistor to base of 2n2222.  Ground the emitter.
> > Emitter and collector to key rig.  I think you have it.
>
> You may also replace the transistori with an opto-isolator (4N28 etc).
> This way you can get ground isolation between the computer and the
> RF equipment.
>
> 73 Costas SV1XV
>
>
> +-----------------------------------------------------------+
> | Costas Krallis, SV1XV                                     |
> | P.O.Box 3066                                              |
> | GR-10210 Athens                   TEL/FAX: +30-1-3811362  |
> | GREECE                            E-MAIL: sv1xv@eexi.gr   |
> +-----------------------------------------------------------+
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>

<Prev in Thread] Current Thread [Next in Thread>