WriteLog
[Top] [All Lists]

Re: [WriteLog] Multi 2 logging

To: "John O'Mara" <john.omara@oakmgmt.com>,<writelog@contesting.com>, "George Johnson" <w1zt@comcast.net>
Subject: Re: [WriteLog] Multi 2 logging
From: "WA9ALS - John" <wa9als@starband.net>
Date: Wed, 22 Oct 2003 18:39:58 -0500
List-post: <mailto:writelog@contesting.com>
Yes, the log can show which COMPUTER logged the QSO
(http://www.qsl.net/wa9als/log.gif), but I don't know how you will show
which RADIO made the QSO in your setup.  Also, in SO2R on a single computer,
you can log which radio made the QSO, but I don't see how you will indicate
the radio in the proposed setup.

----- Original Message ----- 
From: "George Johnson" <w1zt@comcast.net>
To: "John O'Mara" <john.omara@oakmgmt.com>; <writelog@contesting.com>
Sent: Wednesday, October 22, 2003 7:26 AM
Subject: RE: [WriteLog] Multi 2 logging


> John,
> You need to make sure the log reflects which of the TWO transmitters is
> being "credited" with the band change.  As noted in the rules, you set up
2
> stations with 2 logs.  There is a column that identifies the
> transmitter.  Since you are trying to "fit" a third entry point into the
> log, that terminal must identify where to "credit" the QSO.
>
>  From the rules:
>
>     * Each of the two transmitters used must keep a separate chronological
> log for the entire contest period, or if electronic logging is used, the
> electronic log submittal (Cabrillo) must indicate which transmitter made
> each QSO. Each transmitter may make a maximum of 8 band changes in any
> clock hour (00 through 59 minutes).
> Good luck,
> George W1ZT
>
> At 08:14 AM 10/22/2003, John O'Mara wrote:
> >You are right that we plan to only have 2 signals (one per band on 2
> >different bands) but the rules say that each radio is allowed 8 band
> >changes per clock hour.  For example, one radio is on 20 and the other
> >on 15 and they are running.  Our third op is sitting at the third radio
> >listening to V26B on 10 meters.  When the 20 meter op has a break in his
> >run our op on 10 meters will work V26B and then logs him, the 20 meter
> >op will then restart his run.  That counts as two band changes for that
> >(20 meter radio).  Now let's discuss what the log will look like.  The
> >log will show a contact made on 20 meters then a contact on 10 meters
> >and then another contact on 20 meters.  That would be fine but at the
> >same time the 15 meter op is continuing his run and interspersed between
> >the 20 meter and 10 meter contacts there may be some Qs on 15.  How can
> >the log checkers determine if I did a band change from the 20 meter
> >radio or the 15 meter radio.  Therein lies the question.  Clear as mud.
> >
> >Thanks, Jack W4NF
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>