TROUBLE FOUND!
Real men don't need help files eh?
I found the my problem. The frequency/mode button beside the log entry
window has a pull down menu "Log the frequency of QSOs". I only had to
select "rig on COMM4" to make it work.
Thanks for the help. Hope to see you in the MAQP next weekend.
73 Ted W4ZE
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Ted Huf W4ZE
Sent: Saturday, May 01, 2004 2:28 PM
To: writelog@contesting.com
Subject: [WriteLog] MK-1100 Rig Frequency Control ?
I am having trouble getting Writelog to control the frequency for two
radios. The radios are (L) IC-756PRO2 and (R) IC-756PRO. The (L) PRO2 is
connected via the MK-1100 to a RigBlaster PRO on com1. The (R) PRO is
connected to another RigBlaster PRO on com4. The MK-1100 seems to be
working because I do not get the [timeout] message when changing CW speeds.
If I start with all the ports set to [no rigs]. The one that I set up first
will work and control the frequency. When I set up [radio menu] for two
radios and turn on the second one, it will not work. I have tried different
combinations, but still no success.
Any help would be appreciated.
Ted Huf
W4ZE
724-873-5050
Hickory, PA
www.w4ze.com
ted@w4ze.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|