WriteLog
[Top] [All Lists]

RE: [WriteLog] Keying Two Rigs

To: <writelog@contesting.com>
Subject: RE: [WriteLog] Keying Two Rigs
From: "Gary Ferdinand W2CS" <w2cs@bellsouth.net>
Date: Sat, 7 Aug 2004 13:51:05 -0400
List-post: <mailto:writelog@contesting.com>
Barry,

Check out N1MM Logger.  It's free and others have reported its capability to
do SO2R closely resembles what you're looking for.  A good contester friend
of mine uses it when single-op precisely to get the SO2R operation without
the need for an external keyer.

73

Gary W2CS
APex, NC


> At 16:49 8/7/04, Barry Merrill wrote:
> >I'm really bummed out, 'cause it looks like that an external
> >keyer is an absolute requirement to have two radios with
> >WriteLog.
> >
> >I have used COM1 to both Key and Rig Control the ICOM 756PROII.
> >I found I needed to use two COM ports for the Orion, one for keying,
> >and one for rig control.
> >Now, I want to control both radios, key/rig on COM1 for ICOM,
> >Key Orion on COM2, Rig Control Orion on COM3,
> >but I can see no way to set up that configuration.
> >
> >The Port Selection for Keying only allows one COM port to
> >be selected, with no way to key Radio 1 on COM 1 when radio 1
> >is active, and to key Radio 2 on a different Com Port..
> >
> >Any hope/help or must I have an external keyer?
> >
> >Does any other contest program provide the facilities I want?
> >
> >73
> >
> >Barry, W5GN
> >
> >
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> >WriteLog on the web:  http://www.writelog.com/
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/

_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>