> A while back one could change the com ports in the setup from the
> standard com ports of 1 through 4 to other numbers by renaming the
> commslots withing the ini file.
>
> I've checked the ini file and it does not look like Writelog is still
> using 'commslot' to define the com ports.
>
> So how does one change the com port assignments?
>
> Thanks.
>
> Rich Thorne
> ARS: N5ZC
> AMA: N5ZC
> Amarillo, TX
>
Rich,
Commslot is still used to change the com port assignments, if it is not in
the ini file you add them, example of my PORTS section of the
writelog.ini file:
[Ports]
COM2:=9600,n,8,1,x
COM3:=9600,n,8,1
COM4:=9600,n,8,1,x
COM6:=9600,n,8,1
dvktype=2
dvkport=0
cwtype=2
cwport=1
dvkstoploop=1
dvkechomic=1
LPT1=0x3bc
LPT2=0x378
LPT3=0x278
CWPTTCONTROL=1
CWPTTDELAY=5
CommSlot4=6
CommSlot3=4
CommSlot2=3
CommSlot1=2Gordon LaPoint N1MGO
n1mgo@arrl.net
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|