Do you have any printers installed? Maybe the Windows print spooler wants
to own the LPT port. I'm not sure that this is the problem, I'm just
guessing.
Dick, K6KR
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of Mike
Sent: Thursday, September 08, 2005 6:01 PM
To: writelog@contesting.com
Subject: [WriteLog] LPT and XP
Hello,
After too many crashes with 98SE, I've switched to XP. Now I can't
use any of the LPT Ports in the Setup>Ports.
Direct IO has been installed, Fixcom.exe has been executed and DX4Win
V7.01 has been loaded (several references have been made regarding
the LPT driver in DX4Win). The archives have been consulted. This
led to trying several settings for lpt1 in the WL.ini file. Nothing
seems to make a difference.
A few comments on my efforts to get lpt to work:
Set-up - XP w/SP2, WL V10.55D, "DVK type Windows sound board" highlighted.
I doubt if I have Direct IO correctly set-up as it leaves a lot to be
desired on set-up instructions.
When Fixcom.exe is opened the DOS window opens and shuts before
anything can be read. So don't know if I need to do anything else.
DX4Win was loaded and installed a couple of times.
The suggestions in the archive have been tried, without any
success. My LPT1 port settings are 0378 x 037F.
Any ideas on what may be occurring with my set-up to keep lpt from
being able to be used?
73,
Mike, K4GMH
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|