Hi John
Thanks for info but this wont work !!.
The led on TXD wont light whn i have the jumper across it and F1 pressed on
WL
Denis
----- Original Message -----
From: <writelog-request@contesting.com>
To: <writelog@contesting.com>
Sent: Friday, November 04, 2005 5:00 PM
Subject: WriteLog Digest, Vol 35, Issue 5
> Send WriteLog mailing list submissions to
> writelog@contesting.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.contesting.com/mailman/listinfo/writelog
> or, via email, send a message with subject or body 'help' to
> writelog-request@contesting.com
>
> You can reach the person managing the list at
> writelog-owner@contesting.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of WriteLog digest..."
>
>
> Today's Topics:
>
> 1. re WriteLog] new user - WL / Rigblastrer / Multi Switcher
> (Denis O' Flynn)
> 2. Re: re WriteLog] new user - WL / Rigblastrer / Multi Switcher
> (John E Bastin)
> 3. Ukrainian DX RTTY (Rick Mintz)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Fri, 4 Nov 2005 14:38:59 -0000
> From: "Denis O' Flynn" <ei6hb@eircom.net>
> Subject: [WriteLog] re WriteLog] new user - WL / Rigblastrer / Multi
> Switcher
> To: <writelog@contesting.com>
> Message-ID: <002b01c5e14d$7ea7e170$1662a8c0@p4>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Message: 11
> Date: Fri, 4 Nov 2005 09:15:48 -0500
> From: John E Bastin <jbastin@sssnet.com>
> Subject: Re: [WriteLog] new user - WL / Rigblastrer / Multi Switcher
> To: WriteLog Mailing List <writelog@contesting.com>
> Message-ID: <C8A41984-5448-4F44-9F18-33663E6F5D0D@sssnet.com>
> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>
>
> On Nov 4, 2005, at 8:22 AM, Denis O' Flynn wrote:
>
>> My main mode is RTTY. I have set up a log for cqwwrtty for practice
>> purposes. When I press any of the "F" keys, the rig keys,
>> rigblaster keys and sends a carrier. It does not make the same RTTY
>> sound on MONI as other programmes. I can see on the RTTY window the
>> text being sent in blue colour.
>> What am I doing wrong??
>
> How are the jumpers on P5 in the RigBlaster Plus set?
>
> 73,
>
>
> John E Bastin, K8AJS
> jbastin@sssnet.com
> http://www.qsl.net/k8ajs/
>
>
> HI John
>
> D9 is jumped only as shown below
>
> I : : : :
>
>
> Denis EI6HB
>
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Fri, 4 Nov 2005 10:12:22 -0500
> From: John E Bastin <jbastin@sssnet.com>
> Subject: Re: [WriteLog] re WriteLog] new user - WL / Rigblastrer /
> Multi Switcher
> To: WriteLog Mailing List <writelog@contesting.com>
> Message-ID: <7C1067FA-F7FC-4845-BAE2-4E13AF917F82@sssnet.com>
> Content-Type: text/plain; charset=US-ASCII; delsp=yes; format=flowed
>
>
> On Nov 4, 2005, at 9:38 AM, Denis O' Flynn wrote:
>
>> On Nov 4, 2005, at 8:22 AM, Denis O' Flynn wrote:
>>
>>> My main mode is RTTY. I have set up a log for cqwwrtty for practice
>>> purposes. When I press any of the "F" keys, the rig keys,
>>> rigblaster keys and sends a carrier. It does not make the same RTTY
>>> sound on MONI as other programmes. I can see on the RTTY window the
>>> text being sent in blue colour.
>>> What am I doing wrong??
>>
>> How are the jumpers on P5 in the RigBlaster Plus set?
>>
>> 73,
>>
>>
>> John E Bastin, K8AJS
>> jbastin@sssnet.com
>> http://www.qsl.net/k8ajs/
>>
>>
>> HI John
>>
>> D9 is jumped only as shown below
>>
>> I : : : :
>
> That gives you Push-To-Talk (on RTS). For CW you need to jumper D11
> (DTR on Key).
>
> I : : I :
>
> For RTTY (assuming you're using FSK), you need to jumper D13 (TXD on
> Key)
>
> I : : : I
>
> From the RigBlaster Plus manual:
>
> "For keyboard CW operation you would normally set the software so it
> controls PTT on RTS and CW keying on DTR."
>
> and
>
> "For FSK keying you must connect the key out to the FSK keying
> terminals on the back of your radio. You may select both DTR for CW
> and TXD for FSK if your radio and software will accommodate that."
>
> Perhaps this will work on the TS850S. On my radio (an FT1000MP) it
> won't. If I have DTR on Key for CW, FSK doesn't work when I jumper
> TXD on Key. CW, however, doesn't care if I have both DTR on Key and
> TXD on Key jumpers in place.
>
> I decided that the way to solve the problem was to put in an
> additional switch for the DTR on Key jumper. I drilled a small hole
> in the side of the RigBlaster Plus cover and installed a small SPST
> toggle switch. I ran wires from this switch to the DTR on Key jumper
> terminals on P5. When I want to do CW, I throw the switch to close
> the jumper on DTR on Key. When I want to do FSK, I switch it the
> other way, removing the jumper on DTR on Key. TXD on Key is jumpered
> all the time.
>
> Hope this helps.
>
> 73,
>
>
> John E Bastin, K8AJS
> jbastin@sssnet.com
> http://www.qsl.net/k8ajs/
>
>
>
> ------------------------------
>
> Message: 3
> Date: Fri, 4 Nov 2005 11:20:21 -0500
> From: "Rick Mintz" <Rmintz@Rochester.rr.com>
> Subject: [WriteLog] Ukrainian DX RTTY
> To: <writelog@contesting.com>
> Message-ID: <000d01c5e15b$a7c84280$6401a8c0@officep4>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi Gang,
>
> Anyone know which Writelog template will score correctly for the "The
> Ukrainian DX RTTY Contest" this weekend?
>
> Rick
>
> ------------------------------
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>
>
> End of WriteLog Digest, Vol 35, Issue 5
> ***************************************
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|