Never mind! I figured it out. There was a bunch of print job queued up.
Once I cleared them the out the problem is solved!
73 Bud AA3B
-----Original Message-----
From: The Trench Family [mailto:cwtrench@sprynet.com]
Sent: Saturday, March 18, 2006 12:57 AM
To: 'writelog@contesting.com'
Subject: Random transitions to transmit
I have been using my LPT and Direct IO for CW keying for several years quite
successfully. All of sudden, I am experiencing random transitions to
transmit. The condition occurs approximately once every 45 to 60 seconds.
I see that the PTT signal (Pin 16 from the LPT) is being set by the
software. I must hit escape or a message function key to clear the
condition.
I did not experience this problem until tonight. I am currently using
version 10.57, but the problem is also present (tonight) using version
10.44.
The only change significant change I have made recently is the installation
of Turbo Tax. All other hardware and software remains the same.
Any thoughts or advice?
Tnx,
73 Bud AA3B
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|