Mike wrote:
> Hello,
>
> Having trouble getting two sound cards to work in a computer for a
> SO2R set-up. Keep getting the Error Message "Can't open sound card
> (1)". Looked at the WL archives, however, the fixes for dual sound
> card and "Can't open sound card" issues didn't solve the
> problem. The same message is Error Message is received with
> WL/MMTTY and MMTTY stand-alone.
>
> The situation: computer is a Dell XPS 2.8 GHz with W XP SP2. One
> sound card is the on the motherboard board, a Sigma Tel Audio, and
> the other is a Turtle Beach Santa Cruz PCI sound card. The Device
> Manager says both are enabled and ready for use. Either can be
> selected in the Properties window in the Options pull down on the
> Volume Control. The Santa Cruz sound card seems to be Sound Card "0"
> and the Sigma Tel Audio is Sound Card "1". This is the first attempt
> to use the Turtle Beach card although it has been in the computer for
> over a month.
>
> The drivers for Santa Cruz card were reinstalled without any help.
>
> An oddity with WL is that when radio with Sound Card (1) is keyed up
> using Cntrl K, it can not be changed to receive using Cntrl K, but
> has to be unkeyed using Escape. When both MMTTY versions are using
> Sound Card 0, the keying works as it should - Cntrl K keys and unkeys
> whichever radio is selected.
>
> One other quirk is the Sigma Tel Audio seems not to be working as it
> did. Before this attempt to use the Santa Cruz card for the SO2R,
> the Sigma Tel Audio would output sound to the desk top speakers. The
> "line out" from the Sigma Tel Audio still works with other amateur
> S/W applications.
>
> Any help is appreciated on trying to solve this problem.
>
> 73,
> Mike, K4GMH
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
>
Hi Mike;
Hope this will help you..
Under the options tag with MMTTY open the setup tab..
Open the Misc tab and you will see the device ID..
Depending on your computer sound card setup this will determine which
sound card to pick for MMTTY...
My setup has the windows default as Device 0 and my second
sound card as Device 1..
Just setup here with two sound cards and your E mail on the
reflector woke me up to this HI....
Good Luck Mike
73
Bill
WB2KEC
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|