Hi Hector, it can be done. The way I did it, configure MMTTY as per the
Navigator Docs, and make sure it works. Then add the MMTTY plug in, from
Don's AA5AU web site, or I think it is on the Writelog site as well. Set up
Writelog to use the MMTTY plug in, then go to Ports and select the same FSK
port as set up in the Navigtor set up..
Worked for me, at least until my Navigator had a brain melt down, that Glenn
and Clint are fixing..
Have fun and GL
Len
VE3FJB
----- Original Message -----
From: "Hector Garcia XE2K" <j_hector_garcia@sbcglobal.net>
To: <writelog@contesting.com>
Sent: Monday, October 01, 2007 11:59 PM
Subject: [WriteLog] Writelog with Navigator Interface any one ?
> Hi:
>
> I have plans to use a Navigator Interface
> http://www.usinterface.com/ in the CAQ from a friend
> house, is his interface radio etc, but i will like to
> know isf any of the list use it and have configured
> the Write log to it and if any issues i need to take
> care
>
> Let me know if you have some info to save me some hair
> and pains
>
>
>
> Hector Garcia XE2K / XF1K
> Mexicali B.C DM22fp
> P.O.Box 73
> El Centro CA 92244-0073
> USA
> http:// www.xe2k.net
> http://www.dxxe.org
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|