WriteLog
[Top] [All Lists]

Re: [WriteLog] NAQP multi - HELP with name...

To: "'Writelog'" <writelog@contesting.com>
Subject: Re: [WriteLog] NAQP multi - HELP with name...
From: "Dale Martin" <kg5u@hal-pc.org>
Date: Fri, 22 Feb 2008 17:52:58 -0600
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Not False, either.  "As sometimes happens" does not mean "shall".  Sometimes
is not all the time.  

To reduce confusion in other stations and to forestall unnecessary requests
for repeats, the 'smart' multi-op station will use the same name throughout
the contest. 


73,
Dale, kg5u


> Not true:
> 
> Exchange: Operator name and station location (state, province 
> or country) for North American stations; operator name only 
> for non-North American stations. If the name sent is changed 
> during the contest, as sometimes happens with multi-operator 
> stations, the name used for each QSO must be clearly 
> identified in the log.
> 
> Note from above...  If the name sent is changed during the contest (it
> will...) 
> 
> 73, Steve
> 
>  Steve, 
> 
> I'm not sure I understand your question.  But, it sounds like 
> you are changing the operator name that is sent during the contest. 
> 
> In multi-operator category, you use only one name, no matter 
> how many operators you have. 
> 
> 73,
> Dale, kg5u
> 
> 
> > -----Original Message-----
> > From: writelog-bounces@contesting.com 
> > [mailto:writelog-bounces@contesting.com] On Behalf Of Stephen M. 
> > Shearer
> > Sent: Friday, February 22, 2008 11:25 AM
> > To: Writelog
> > Subject: [WriteLog] NAQP multi - HELP with name...
> > 
> > A question (most I have answered by reading)...
> > 
> > 1. I can "change operators" to change the current operator name.
> > 2. I can add "operator" with the "exchange format setup" to the 
> > exchange field.
> > 3. I can use a function like: "%R%C %F15 DE %E" for the memory "F 
> > keys" to send the name if it was in the exchange field.
> > 4. WriteLog doesn't seem to add the "current operator" into the 
> > "operator"
> > column until the contact is logged.
> > 5. I don't want to add the operator name into the exchange 
> field for 
> > every contact...
> > 
> > NAQP uses name as part of the exchange, is there a way (I
> > missed) to use the operator as the name (without entry every
> > contact) or do I need to have a different log for each operator and 
> > merge at the end???
> > 
> > 73, NR3I Dayspring School ARC (aka Steve WB3LGC)
> > 
> > 
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web:  http://www.writelog.com/
> > 
> 
> 
> 
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
> 


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>