WriteLog
[Top] [All Lists]

Re: [WriteLog] CW Messages Win 7 64 Bit

To: "TNeill1648@aol.com" <TNeill1648@aol.com>
Subject: Re: [WriteLog] CW Messages Win 7 64 Bit
From: idarack@gmail.com
Date: Wed, 26 Jan 2011 14:26:18 -0500
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
I'm running win 7 32 bit and keying CW. Radio is a K3 and sound card is an 
external Sig USB.WL version is 10.83e.  If you plug an external speaker in , do 
you here correct CW from WL in the speaker? This way you can isolate the 
problem from your radio.
Irwin KD3TB
 
Sent from my iPhone

On Jan 26, 2011, at 10:36 AM, TNeill1648@aol.com wrote:

> My problem continues with WriteLog and Win 7 64 bit.
> 
> My CW messages are coming out garbled.  For example, one of the  message 
> buffers is set to send ....TU K4XG.
> 
> What is actually being sent is TXG.  All of the other F key messages  are 
> also only sending parts of the stored message.
> 
> A gentleman in Europe suggested going into Tools, Key board Config, and  
> doing a reset to go back to the defaults.  I did that and it actually  
> worked. 
> 
> 
> I closed down WL and reopened it.  Back to the same old problem of not  
> sending the complete CW message.  Doing the reset did not correct the  
> problem.
> 
> Any thoughts or recommendations would be appreciated.
> 
> Tom
> 
> K4XG
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web:  http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>